Ghost Immobiliser Fitting
Protect your vehicle against key theft, cloning and hacking using the first aftermarket CAN-Immobiliser. With the added option to connect to an Ghost app and GPS tracking system that can send you alerts to call when your car is altered with or stolen.
Installing a Ghost immobiliser is fairly simple for the skilled technician. Having the right tools, insulation tape, and heat shrink tubing is crucial.
Getting Started
In contrast to physical security devices such as wheel locks or car alarms, ghost immobilisers safeguard your vehicle without the need for key fobs or LED indicators. They are directly connected to the ECU CAN data network and are activated only by entering a PIN code. This provides a higher level of security against key hacking, ECU swapping and cloning.
Therefore, the installation of a ghost immobiliser Birmingham must be completed with a high degree of speed and accuracy. It's like walking through a minefield. A mistake could result in serious damage to your vehicle's electrical circuits. To avoid this, it's crucial that you know the procedure for installing and prepare your vehicle accordingly.
The first step is to prepare the vehicle by removing interior panels to make room for the immobiliser device. Once you have found the perfect location to conceal it then use cable tie to fix it. Then, tidy up your wiring by connecting loose wires and using insulation tape to cover the exposed connections. This reduces the risk of a short circuit that is not intended to happen, while improving the aesthetics and reducing the chance of theft.
Finally, identify a source of constant 12V power and a grounding point for the ghost immobiliser. Once you've located these connections, test the power cables using a multimeter, to ensure they're delivering a consistent voltage. Connect the CAN H and CAN L wires from the immobiliser to your chosen power source and grounding point.
Once you've made all of the connections required It's crucial to double-check the connections and check the immobiliser for signs of corrosion or other damage. Also, test the system to make sure it is working properly by entering a pin code and then starting the engine. This should be a regular part of your daily routine as it will allow you to detect any intermittent problems early. Regular testing will also help to extend the life of the device and keep it functioning at its best.
Preparing the Vehicle
Installing a Ghost immobiliser is a process that requires expertise and tools. A wiring diagram of the vehicle is essential to locate the right wires and making precise connections. A multimeter can be used to verify the electrical value and ensure safety. Insulation tape and cable tie can be used to secure connections and protect them from alteration. A user manual is available for your Ghost Immobiliser. It will provide you with specific instructions tailored to that model.
Once installed the ghost immobiliser can stop unauthorised engine start-ups by requiring the owner to enter a unique code using the buttons on the console or steering wheel. This can be done manually or remotely through an app for mobile phones, and the code can be modified by the vehicle's owner at any time. The device is silent and unnoticeable by thieves since it doesn't emit any radio frequency.
A ghost immobiliser is connected directly to the vehicle's CAN bus, a network that communicates with all of the electronic control units (ECUs). It intercepts signals sent by the ECUs and blocks the engine from running if the ECU detects a false signal. The system is weatherproof and tamper proof. It has no keys or LED indicators to draw thieves' attention.
It can be positioned behind the dashboard or in an inconspicuous area, so it isn't visible to thieves and does not hinder the vehicle's performance. It can be placed in a small container so it is less likely to be observed by unscrupulous salespeople during a test-drive.
Its stealthy operation and integration with the vehicle's CAN bus system make it a formidable deterrent to modern methods of theft, including key cloning and signal relay attacks. Combining the system with other security measures will create an effective barrier to frustrate even the most persistent of thieves. This is why more insurance companies are now suggesting or even requiring ghost immobilisers to be fitted, as it can significantly reduce the cost of insurance.
Making the Connections
Ghost immobilisers are silent unlike traditional security systems which can be heard by thieves. They prevent them from knowing that your vehicle is running. They also stop high tech methods of stealing vehicles, like OBD hacking. They can also be put in without causing permanent damage to your car, making them an excellent choice for people who plan to sell their vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable methods to prevent car theft. It disables your engine using the CAN data network and generates a unique PIN code which is difficult to steal from criminals. It can be fitted in various vehicles and integrates with a number of available features, including car alarms and GPS trackers, steering wheel locks, and door lock bypass systems.
If you choose to install an Ghost immobiliser, make sure to refer to the wiring diagram for your particular car model to identify the wires to connect. Double-check the locations of these wires to ensure accuracy and mark them with tape or labels to aid in keeping the track of them. It is also necessary to locate a source of continuous power (12V) and a grounding point to the system. Once autowatch ghost immobiliser cost have the necessary components, you can start making connections to complete the installation.
The ghost immobiliser will not allow your vehicle to start unless the pin code is entered through the buttons on the dashboard or steering wheel. This will stop ECU cloning as well as other methods of stealing vehicles. It can also be used with other Thatcham approved security equipment such as alarms and tyre clips to give your car an even higher security level.
As the UK automotive aftermarket market grows as do the options to secure your vehicle. There are so many ways for thieves to get into your car and take it, therefore it's vital to do everything you can to stop it from being taken. That's why ghost immobilisers are very popular among responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU, preventing the engine from starting until a specific PIN code is entered. This makes it extremely difficult for thieves to steal the key fob of your car and start your car, and even more difficult to disable the system by hacking into its electronic components.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help you locate your vehicle in the event that it's stolen. This isn't an everyday feature in aftermarket security solutions however it's a great option to increase your security and provide peace of mind knowing your vehicle is always secure.
The Ghost-II immobiliser offers not only greater security, but also a convenient experience for the user by getting rid of the need for additional key fobs or devices. It is simple and easy PIN code entry system that works seamlessly into your daily routine. It also offers options for deactivation and features that let you temporarily disable the immobiliser for valet parking and servicing.
Before beginning the installation process, you should familiarise yourself with your vehicle's wiring and prepare the tools. A basic set of hand tools will allow you the flexibility to make precise connections, while a multimeter can help verify electrical values. Insulation tape and heat shrink tubing are also crucial for securing connections from short circuits, while cable ties can be used to hold the wire in the right place. Lastly, it's important to be in a well-lit space and wear appropriate safety gear when working with electrical tools and components.
After you've completed the installation, you must test the Ghost immobiliser to ensure that it's working as intended. First, you need to try to start the vehicle without entering the PIN code. If this fails then you'll have to test again and examine the connections more thoroughly.
The Ghost Immobiliser, unlike other security systems, is a hidden device that cannot be identified by thieves. It is also far more effective than physical deterrents such as wheel clamps and steering locks. It is TASSA-approved and recognized by some insurance companies. This makes it a cost effective investment that will give you the peace of heart you deserve.