Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It is discreet, does not use LED indicators or key fobs and is concealed in the wiring of the vehicle.
It also allows users to temporarily disable the system by using Transport Mode in the event of renting out their vehicle. This guide will take you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system is connected directly to the ECU of your vehicle and protected by a PIN code you set. It's undetectable to thieves using diagnostic scanners or other advanced methods, and is not able to be disabled through circuit cuts.
The system is easy to use, but it's essential to use a professional installation to ensure a smooth and secure connection with your vehicle's ECU. Installers approved by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking or alarm system to complete the protection package for your vehicle.
To avoid an accidental deployment of airbags or short circuits The installer must first disconnect your battery. Once this is done the installer is able to safely begin work. Basic hand tools are useful to make precise connections and a multimeter can be used to check electrical values and ensure safety. Cable ties and insulation tape are also essential for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's manual will give specific instructions that are specifically tailored to your specific model.
During the installation process, it's essential to choose a grounding point that's free of any paint or debris. The installer should be sure that the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on your vehicle's ECU. Depending on the model, these wires may require soldering or plugged into. To ensure a reliable and long-lasting connection, it is recommended that you choose a top-quality plug.
Transport Mode can be turned on by the customer once the installation is completed. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. To accomplish this, the customer has to press the service button on the dashboard 5 times within 2 seconds. After this is done, the system will confirm with 5 signal indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's an excellent choice for those who rent their vehicles frequently on platforms such as Turo. Having an immobiliser can also lower insurance costs, as it greatly reduces the chance of theft.
Getting Started
If you're seeking a solution to safeguard your vehicle from theft, you can't go wrong with an autowatch ghost immobiliser. The device protects your vehicle from starting even the theft or copies the key. It is possible because of its advanced technology, which prevents the engine from starting until the right PIN code is entered.
The device works by connecting to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It makes use of the buttons on your dashboard and steering to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your vehicle. This is the most secure security system that will safeguard your car's pride and joy and will ensure its value in the event that you decide to sell it in the future.
Installing a ghost ignition is a simple process, but it is important to follow the directions carefully to avoid electrical issues and system malfunctions. You must first locate a 12V power supply and a solid grounding on the chassis of your car. After that, you can begin to connect the wires to the immobiliser. Use high-quality connectors and soldering methods to create an effective connection. Make sure to shield the connections with heat shrink tubing or insulation tape, as well as other materials to avoid short circuits in electrical power.
Once the wires are connected, you can plug in the battery and begin the engine to check whether the immobiliser works. Once everything is working properly, you can install it in a secure location beneath the dash or anywhere else in the vehicle. Be sure to cover it in a secure manner to prevent thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it's a top-quality deterrent to car thieves. It is impervious to key cloning and hacking and is not able to be disabled without the code. It is also simple to use and can be put into the service valet mode to ensure that your vehicle will not be activated when you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to prevent vehicle theft. It connects directly to the car's CAN bus network and communicates with the ECU which makes it virtually undetectable to your vehicle. In contrast to other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with your vehicle's factory settings.
The system is also inaccessible by thieves using scanners for diagnostics. The system doesn't transmit or receive radio frequency signals but instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modifications to your vehicle's existing key fobs.
To utilize the Ghost Immobiliser, simply turn on your car's ignition and enter your disarm sequence (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. You are now able to begin driving your car in a safe manner.
Once installed The Ghost Immobiliser can protect your car from hacking and key cloning, while protecting the value of your pride and joy. If you have to surrender your vehicle for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) as well as a grounding source to complete the installation of a Ghost immobiliser. Be sure that both are properly insulated and can be touched. ghost 2 immobiliser problems is also recommended to use cable tie to secure and bundle the wires, since this will decrease the chance of being tampered with by thieves. To avoid autowatch ghost immobiliser cost , double-check these points and mark them with the use of tape or labels. It's recommended to check all connections for signs wear and tear. Loose connections can lead to system malfunctions, so be certain that they are securely in place and securely insulated. Don't forget to test the Ghost Immobiliser after the installation is completed. This will confirm that the unit is working properly and that all connections and insulation are safe. Make sure to address any issues immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that connects seamlessly with your car's ECU to prevent the motor from starting without authorization. Its cutting-edge technology safeguards your vehicle from key cloning, hacking, and other methods that thieves employ to steal cars. The Ghost is a perfect complement to existing tracking and alarm systems to provide the best protection for your vehicle. The Ghost's unique features, paired with its discreet design makes it a sought-after choice for drivers who love cars and security-conscious drivers.
It is crucial to follow the steps of installation in order to ensure the complete integration of the Ghost Immobiliser. The best way to begin is to refer to the wiring diagram of your vehicle that serves as a roadmap for locating and connecting the required wires. After that, you'll need determine the power source and grounding points. Once these are found then you'll be required to mark them so that they are easy to locate during the installation process. It is essential to use top-quality materials and tools. Hand tools are essential to assist you in making precise connections. A multimeter can verify electrical values, and also ensure safety. Insulation tape and cable ties will help keep all connections tidy and neat. A Ghost-specific user manual is also available.
It is crucial to test the system before installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser works as intended and prevent unauthorised vehicle starts. This procedure should be carried out frequently as part of your regular inspections of your vehicle to ensure that the system is working properly.
Once the installation has been completed, you are now able to start driving your car with confidence. The Ghost will keep your precious possessions secure from thieves who might steal it and ensure that no one can take off with your vehicle without the correct PIN. The Ghost can also be used with a Thatcham-approved tracker to identify any attempts at tampering or theft that could lead to the location of your vehicle if it's stolen.
The Ghost can be used on a variety of vehicles and is compatible with most major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to learn more about our services and installation options. We are a TASSA registered installer, which guarantees we follow strict standards for installing our products. This assures customers, insurance companies, and law enforcement agencies that all installations are performed safely and properly.